MSP430 family: Confirm the DALI solution

Kaka

Hi community member,

Please let me confirm the following question.
[Question]
Have you ever seen the application which MSP430is mounted the DALI interface on?
We would like to know whether this interface is a proven and trusted with using MSP430.

If you have any questions, please let me know.
Best regards.
Kaka

over 10 years ago

0 Ryan Brown1 over 10 years ago

TI__Guru**** 224077 points

Hi Kaka,

TI provides both an application report and TI Design on this topic.

www.ti.com/.../slaa422a.pdf
www.ti.com/.../tidm-msp-dali

We can therefore confirm that the DALI interface is possible using a MSP430.

Regards,
Ryan

0 Kaka over 10 years ago in reply to Ryan Brown1

Guru 24520 points

Hi Ryan,

Thank you for you response.
I know that TI provide a report and TI design. However I would like to know whether there is any actual customer application which it is used the DALI interface by MSP430. So Is there any actual application which it was used this solution?

Best regards
kaka

0 Ryan Brown1 over 10 years ago in reply to Kaka

TI__Guru**** 224077 points

Kaka,

TI Designs are typically only created if there is a market need for the solution, so it is safe to say that there are several customer applications for which this solution is being used.

Regards,
Ryan

0 Kaka over 10 years ago in reply to Ryan Brown1

Guru 24520 points

Hi Rayn,

Thank you for your response.
I will inform your comments to my customer.

Best regards.
Kaka

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430 family: Confirm the DALI solution