MSP430FR5738 pin define

Ashley Kao

On MSP430FR573x sepc page 8 Figure 4.4, empty pin is A1, but page 117 Mechanical data, empty pin are defined E1, what is correct?

over 9 years ago

0 Clemens Ladisch over 9 years ago

Guru 318700 points

Table 4-1 (Signal Descriptions) lists pin E1 as VCORE.

On page 117, the top-left image shows the top-side index area for A1, so the bottom-side index (missing pin) must be at the same place.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5738 pin define