Is my schema correct ? MSP430L092

Judes Tasset

Prodigy 200 points

Other Parts Discussed in Thread: MSP430L092, MSP-FET

Hello,

I would like to know if, with this schema, i can connect my msp430l092 and my MSP-FET.

Until now, i dont' succeed to establish the connection beetween those.

I want to be sure, it don't come from my card design.

Thanks

over 9 years ago

0 Judes Tasset over 9 years ago

Prodigy 200 points

Help needed please !

0 Ryan Brown1 over 9 years ago

TI__Guru**** 219337 points

Hello Judes,

Did you base your schematic design off of the MSP-TS430L092 Target Socket Board? Since the MSP-FET operates from 1.8 to 3.6 V and the MSP430L092 from 0.9 to 1.65 V you need to incorporate hardware similar to that of the MSP-TS430L092 Active Cable board to translate power and JTAG signals from the MSP-FET down to the MSP430L092. More information is provided on the MSP-TS430L092 product page and Sections B.3 and B.4 of the Hardware Tools User's Guide:

www.ti.com/.../msp-ts430l092
www.ti.com/.../slau278w.pdf

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Is my schema correct ? MSP430L092