• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 79 subscribers
  • Views 571 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Target board of MSP430F5419IPZ

PAN-Maro
Prodigy 195 points

Other Parts Discussed in Thread: MSP430F5438, MSP430F5419

Dear Sirs:

As the target board of MSP430F5419IPZ, do you MSP-TS430PZ5x100 will be used?
MSP430F5419IPZ and MSP430F5438IPZ are package, pin assignment because it is both the same.

Regards. PAN-MARO.

  • 0
    TI__Mastermind 23135 points
    Hi PAN-Maro,

    Yes, you should use the same target board for for the MSP430F5438 and MSP430F5419.

    Just as a point of clarification, do you have the A or non-A version of this device? The MSP430F5419IPZ is the 100pin QFP version of the F5419 non-A device. The A version of the device would be the MSP430F5419AIPZ. The non-A version is not recommended for new designs, and we recommend the A version for all new designs.

    Mike
  • 0 in reply to Mike Pridgen
    Prodigy 195 points
    Hi Mike,

    Thank you for the advice.
    Yes, to proceed with the work with MSP430F5419AIPZ and MSP-TS430PZ5x100.

    Regards. PAN-MARO.

**Attention** This is a public forum