• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

USB BSL firmware upgrader v1.3.1

eltury
Genius 3330 points
Other Parts Discussed in Thread: MSP430F5510

Successfully programmed an MSP430F5510 via this method and the code ran.

After I made a minor code change and tried to reprogram I get a "memory verification error" after the firmware was sent and the green bar just sits there pulsating.

Will it ever recover? Do I have any options? 

Thanks.

  • 0
    Guru 34453 points

    Select P1.0 blink example and try few times to re-flash it. If it is not working than try mass erase by SBW / JTAG.

  • 0 in reply to zrno soli
    Genius 3330 points
    Thanks for the suggestion. I believe it actually reprogrammed since I plugged it in and measured my SPI clock to be what I had changed it to.
    Still debugging so I'm not sure it all is good.

**Attention** This is a public forum