MSP430F5529LP LaunchPad

Felix Beck

Other Parts Discussed in Thread: MSP430G2553

Ich bekomme keine Verbindung aufgebaut.

Der Treiber kann nicht installiert werden und es leuchtet auch keine LED auf dem Board. ( Ich habe zwei gekauft und keins funktioniert)

Mit meinem alten MSP430 LaunchPad habe ich keine Probleme. CCS spielt ohne Probleme die Programme auf den MSP430G2553.

over 9 years ago

0 Clemens Ladisch over 9 years ago

Guru 320650 points

Which OS? What happens when you plug it in? Is anything shown in Driver Manager? Can you try a different USB port?

0 Felix Beck over 9 years ago in reply to Clemens Ladisch

Prodigy 40 points

- Windows 7 Ultimate 64bit
- "A not identifiable USB-input device"
- no

0 Felix Beck over 9 years ago in reply to Felix Beck

Prodigy 40 points

Error initializing emulator:
No USB FET was found

No LED is shining

And I can´t see the memory in the Windows window (compare USER-GUID from TI)

0 Clemens Ladisch over 9 years ago in reply to Felix Beck

Guru 320650 points

The LP might be broken, but if you have the same error with both boards, this sounds more like a broken cable or USB port. Please double-check these components with the old LP.

0 Felix Beck over 9 years ago in reply to Clemens Ladisch

Prodigy 40 points

I have check at all USB ports. AND I done the same on WIndwos 10.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5529LP LaunchPad