• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 79 subscribers
  • Views 970 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F673x DVSYS terminal

takin
Prodigy 200 points

Other Parts Discussed in Thread: MSP430F6733

Hello

I have one question.

About Pin No.59 DVSYS on the MSP430F6733, if I don't use it, how can I handle it?

I confirmed with SLAA517E, and it shows DVSYS is connected to the GND through capacitor. IS IT RIGHT?  

  • 0
    TI__Guru 56685 points
    Hello takin,

    Please see device datasheet for proper connection of DVSYS and VDSYS. This information is located in Table 6 - Terminal Descriptions and the Auxiliary Supplies - Recommended Operating Conditions table.
  • 0 in reply to Jace H
    Prodigy 200 points
    Hello JH

    I saw the data sheet and it shows follow
    ThepinsVDSYSandDVSYSmustbeconnectedexternallyonboardforproperdeviceoperation.

    If you have another comment, would you show me that.

    BTW the EVB data sheet shows VDSYS connect GND thorough the capacitor.
    What is the proper device operation?
    Also I don't use AUX supplies.
    What should I do?
  • 0 in reply to takin
    TI__Guru 56685 points

    Hello takin,

    Terminal Functions table:

    VDSYS must be connected to DVSYS for device operation. VDSYS must also have CVSYS connected to it similar to how VCORE needs CVCORE.

**Attention** This is a public forum