• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 2759 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

the difference bettween MSP430 POR PUC BOR

Kissn Liu
Expert 1245 points

I know that BOR will set all the register to user manual's state

will POR or PUC casue the register to be default value,ie will POR set the PMM register to its defualt value?

and what is difference bettween the PUC and  POR?

  • 0
    TI__Guru**** 217317 points

    Hi Kissn,

    Differences between the BOR, POR, and PUC are covered in the System Reset and Initialization section of the User's Guide.  The effect of each on the register reset conditions is explained in the Register Bit Conventions section of the User's Guide, and are noted below the PMM register tables of the corresponding section.

    Regards, Ryan

**Attention** This is a public forum