Help me please

user4811616

Prodigy 20 points

Other Parts Discussed in Thread: MSP430G2553, HDC1080

My projects will be designed using MSP 430. Code Composer or IAR for

coding. My projects must contain interrupt service routines.

Design a message sending system using a digital keypad. Your messages

should be read from serial monitor. You should implement three

commands. Temp message must cause reading of a temperature. Hum

message must cause reading of humidity. Buz message must set buzzer. Help me please for code and sensors ( humidity and temperature sensor )

over 8 years ago

0 Cameron LaFollette over 8 years ago

TI__Genius 14875 points

Hi user4811616,
We don't typical develop code for you. Have you tried looking at our example code?
From the sound of it, you will likely want to check out the I2C and/or SPI examples, along with UART examples, especially the UART Echo.

Which MSP are you using?
What specific questions do you have?

0 user4811616 over 8 years ago in reply to Cameron LaFollette

Prodigy 20 points

I'm using msp430g2553 . I haven't tried looking at your example code. Where can I find your codes? ( Can you write links ? ) and finally Which sensors can I use for temperature and humidity?

Best regards.

0 Dennis Eichmann over 8 years ago in reply to user4811616

Guru 74080 points

user4811616 said:
Where can I find your codes?

Here are the code examples for the MSP430G2553.

user4811616 said:
Which sensors can I use for temperature and humidity?

TI has parts for this like the HDC1080, but they might be a bit hard to use for an entry level hobby project due to their packages. But there are adapter boards available.

0 Ilmars over 8 years ago in reply to user4811616

Guru 46710 points

user4811616 said:
Can you write links

You can go to msp430g2553 product page and find the links yourself. After all it is not that hard.

0 Todd Anderson78572 over 8 years ago in reply to Ilmars

Guru 14640 points

Check out energia.nu/.../
Looks like it has a buzzer, and temperature/humidity sensors.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Help me please