MSP430FR2433: Interfacing magnetic sensor AAH002 - 02 with MSP430FR2433

Hello Akshay,

This will depend on the sensor. The sensor should have a section in its datasheet telling you how to get data from it. If the sensor has some form of digital communication via SPI/I2C/UART, it is rather simple to connect to the MSP430. Please see the eUSCI section of the datasheet for this. If the sensor outputs some form of Analog voltage for data, then you will have to use the ADCs to read this data. Please see the ADC chapter of the user guide for more information on how to use.