• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 80 subscribers
  • Views 1168 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6989: Please help in Current Measurement of 0-30A range using MSP430FR6989 and ACS712?

Suvidha Biradar
Prodigy 10 points
Part Number: MSP430FR6989
Other Parts Discussed in Thread: MSP430FE425A

How to measure current of 0 to 30A using MSP430FR6989 and acs712?

We are trying to build a Energy monitoring system which will monitor single phase power of 220V, 0-30A Current.

  • 0
    Guru 46710 points

    Suvidha Biradar said:
    How to measure current of 0 to 30A using MSP430FR6989 and acs712?

    You shall measure output voltage of acs712 using ADC of msp430. As simple as that.

    12bits of ADC is not enough for meter. SD ADC needed. You shall use msp430fe425a or similar.

    Suvidha Biradar said:
    We are trying to build a Energy monitoring system which will monitor single phase power of 220V, 0-30A Current.

    Did you check TI meter reference designs? If not - then you shall do it

  • 0 in reply to Ilmars
    Mastermind 9125 points
    12 bits ADC should be enough for general usage. How about the required precision?

**Attention** This is a public forum