MSP430FR2633: MSP430FR2633 E-lock refer design captivatedesignCenter file

Ashley Kao

Intellectual 360 points

Part Number: MSP430FR2633
Other Parts Discussed in Thread: MSPCAPTDSNCTR

My customer must to refer the e-lock to their application.

www.ti.com/.../tiduc04.pdf

But the issue is I don't find GUI file in the software package.

Can you provide refer GUI .ser file?

thanks

Ashley

over 9 years ago

0 Ryan Brown1 over 9 years ago

TI__Guru**** 223427 points

Hi Ashley,

The MSPCAPTDSNCTR MSP CapTIvate Design Center GUI is available for download on its corresponding tools page.

Regards,
Ryan

0 Ashley Kao over 9 years ago in reply to Ryan Brown1

Intellectual 360 points

Dear Sir,

I already know where to download the GUI,

What i need is the .ser file in the sample project which is download from the link

http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=tidccs4&fileType=zip

need your help to know how to get the .ser file, thank you.

Ashley

0 Ryan Brown1 over 9 years ago in reply to Ashley Kao

TI__Guru**** 223427 points

Hi Ashley,

The User's Guide does not mention an additional GUI and the only software resources provided are for the CCS project, therefore you will need to be more specific about what you are looking for.

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2633: MSP430FR2633 E-lock refer design captivatedesignCenter file