• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 582 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS: MSP430FG4618/F2013 + CZ-EMM2

Jan Kowalski96
Prodigy 10 points

Other Parts Discussed in Thread: MSP430FG4618, MSP430F2013

Tool/software: Code Composer Studio

Hi all. I looking some help with MSP430FG4618/F2013 + CZ-EMM2. Im totally green in that but i must do it on some lessons in school. I dont know how to connect this one and i dont know how to program this. CZ-EMM2 is card reader. I need to make sth like program with open door.  Sory for my bad eng. If this post brake some rules plz delete it. 

  • 0
    TI__Genius 15370 points

    Hi Jan,

    Are you going to be using the MSP430FG4618 or the MSP430F2013 for this application. These parts are significantly different and each offers a combination of different peripherals and functionality. I would first start by narrowing down which device you will be using.

    Then, TI provides LaunchPads and Target Development boards for evaluation. This is the first place to start when getting hardware to develop on. I recommend you look into the MSP430 LaunchPad Value Line Development kit if you decide to use the MSP430F2013 . If you decide to use the MSP430FG4618 TI offers a MSP-TS430PZ100 - 100-pin Target Development Board for MSP430F4x MCUs. 

    Finally, once you've decided on a device, MSP430ware contains a wide variety of examples across the entire MSP430 product line that demonstrate how to properly use peripherals on TI MSP430 devices. 

    Let me know if you have any further questions. 

    Best regard, 

    Caleb Overbay

**Attention** This is a public forum