MSP430F5309: MSPflasher compiled to run on ARM architecture

Hi,

For your information, I tried to build from the mspflasher package source and I receive an error saying that the compiler can't find the lmsp430 library file.

g++ -std=c++0x -I./Inc -c MSP430_Flasher.cpp -o MSP430_Flasher.o
g++ -std=c++0x -I./Inc -c Support.cpp -o Support.o
g++ -std=c++0x -I./Inc -c StdUseCase.cpp -o StdUseCase.o
g++ -o ../MSP430Flasher -std=c++0x -I./Inc MSP430_Flasher.o Support.o StdUseCase.o -L../ -lmsp430
/usr/bin/ld: cannot find -lmsp430
collect2: error: ld returned 1 exit status
Makefile:11: recipe for target ‘../MSP430Flasher’ failed
make: *** [../MSP430Flasher] Error 1


Thank you

MSP-Flasher using open source MSP Debug Stack (http://www.ti.com/tool/mspds), by calling dll functions on Win. Don't know story related to MSP Debug Stack and linux.

I am not familiar with R-Pi, but in your solution you still need extra hardware (FET) to program device. Maybe it is possible to flash MSP430 device directly from Pi without any extra hardware.

http://forum.43oh.com/topic/10035-4-wire-jtag-with-mspdebug-and-raspberry-pi-gpio/