MSP430F2132: BSLDemo upload program

user4780320

Prodigy 150 points

Part Number: MSP430F2132

Hi,

I using BSLDemo 2.01 for upload program file txt-Ti.

Now, I have a fuction call to BSL intro program file.

My problem is when upload program file "BSLDEMO2.exe -cCOM35 +ecpvw TXT.txt ".

The BSLDemo don't given any error.

My problem is when run a MSP the uart not work and when I use Lite-Fet for upload the DCO constants fail.

over 8 years ago

0 user4780320 over 8 years ago

Prodigy 150 points

I see that function erease all memory include DCO settings.
I read on BSLDemo Terminal that "a" Restore InfoA after mass erease. I used this option, but don't work.

0 Caleb Overbay over 8 years ago in reply to user4780320

TI__Genius 15370 points

Hi,

Please take a look at this previous E2E post:
e2e.ti.com/.../1658539

I think the answer to some of your questions can be found there.

Best regards,
Caleb Overbay

0 Caleb Overbay over 8 years ago in reply to user4780320

TI__Genius 15370 points

Hi,

Was the above E2E post able to solve your issues?

Best regards,
Caleb Overbay

0 user4780320 over 8 years ago in reply to Caleb Overbay

Prodigy 150 points

Yes.

Since function +a is not work. I used de read function for save DCO calibration (InfoA) in txt file.

Next step is a copy this values in txt program.

Other question this program work on PC with 64 bits?

0 Caleb Overbay over 8 years ago in reply to user4780320

TI__Genius 15370 points

Hi,

To my knowledge the program works on 64-bit windows systems. If you don't have any further questions at this point, I'll be closing this thread. If you have anymore questions or comments regarding this, feel free to reply to this comment and the thread will be re-opened.

Best regards,
Caleb Overbay

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F2132: BSLDemo upload program