• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 666 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6989: Is GUI is possible on MSP430FR6989 Launchpad??

Shardul Modi
Prodigy 90 points
Part Number: MSP430FR6989


Hello,

I would like to know that GUI is possible on the MSP430FR6989? 

If yes then How do I do it? Please let me know the steps to follow to be able to do that.

Thanks a lot.

Regards,

Shardul Modi

  • 0
    TI__Guru**** 218257 points
    Hello Shardul,

    It is possible to interact with a PC GUI using the MSP430FR6989 backchannel UART communication. You should be able to see the LaunchPad enumerating as an Application UART under your Device Manager's COM ports, so it will be possible to develop a GUI with any platform that allows for serial port communication. I would also recommend that you look into TI's GUI Composer tool.

    Regards,
    Ryan

**Attention** This is a public forum