• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 1480 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA-TI library file compatible with TINA software

Suvarna Battin
Prodigy 70 points

Other Parts Discussed in Thread: MSP430FR2033, TINA-TI

Hello everyone,

                       I have to simulate and  design a  ckt in TINA software using MSP430FR2033 controller but spice model and pin diagram  of MSP430FR2033 controller is  not available in TINA software.so any one tell me TINA-TI library files are compatible  with TINA software?

  • 0
    TI__Guru 56685 points
    Hello,

    No MSP430 or any other TI MCU or DSP is available to be used in TINA as there are no SPICE models for them . If you are trying to model the affects of say the ADC on an attached circuit, we do offer an effective load schematic within the User Guide for the ADC. The values associated with the schematic can be found within the Datasheet.

    In practice, the above is usually not necessary to model. After finding the effective impedance of your attached circuit to the ADC, we provide an equation within the User Guide that uses that information to adjust sample and hold times of the ADC so you can properly sample your signal. Please see teh ADC section of the MSP430FR2033 for more details.

**Attention** This is a public forum