MSP-FET use with Uniflash V4

Prafulla Salunke

Intellectual 660 points

Other Parts Discussed in Thread: UNIFLASH, MSP-FET

I am new to TI controllers. Can i use MSP FET flash emulator with CCS7?

Also can this device be used to burn txt file on controller using UniFlash V4??

Plz help.

over 9 years ago

0 Ki over 9 years ago

TI__Guru**** 486311 points

Hello,
Yes, the MSP-FET probe is supported by CCSv7 and UniFlash v4

Thanks
ki

0 Prafulla Salunke over 9 years ago in reply to Ki

Intellectual 660 points

Hello ki,
Thanks for your answer. I have one more query. I tried to program my MSP430F4 series device using MSP-FET probe with FET PRO Version 3.4. It first asked to update firmware on MSP FET430IUF. I clicked for OK. After firmware updation it displayed error:
JTAG communication initialization.... failed
Verifying Security Fuse .................... failed
--------------- FAILED !!! -----------------

MODE n POWER LED continously toggled. Is there any solution for this. OR is there any other flash programmer tool available which can be useful?

0 Ryan Brown1 over 9 years ago in reply to Prafulla Salunke

TI__Guru**** 223877 points

Praful,

We will address your question on the following MSP E2E thread: e2e.ti.com/.../

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP-FET use with Uniflash V4