• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 574 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430G2452: CCS/MSP430G2452:

Kaustubh Bhal
Prodigy 40 points

Part Number: MSP430G2452

Tool/software: Code Composer Studio

Hello,

I have NSP430G2452 value line launch pad. I am trying to use CCS Cloud to build my first project on my macbook pro. I have connected launch pad with my macbook using USB cable. When I try to run my project, it gets compiled, but I get error shown below. How can I resolve this error?

Thanks,

Kaustubh

  • 0
    TI__Guru**** 223847 points
    Hello Kaustubh,

    It appears that the eZ-430 device drivers may not have been downloaded, did the CCS Cloud Agent prompt you to install anything? You could try restarting your computer, create a new project, or reset the MSP-EXP430G2 hardware. It is worth mentioning the CCS Cloud only supports loading images to flash on the MSP-EXP430G2452 so long-term you could be better off downloading the full version of CCS.

    Regards,
    Ryan

**Attention** This is a public forum