MSP430FR2633: Confirm the "BSL18" on Errata

Kaka

Part Number: MSP430FR2633

Hi TI Experts,

Would you please explain about "BSL18" on Errata?
Does this errata mean that this device did not support the "Blank Device Detection"?

If you have any question, please let me know.
Best regards.
Kaka

over 8 years ago

0 Ryan Brown1 over 8 years ago

TI__Guru**** 218427 points

Hi Kaka,

Contrary to what is stated in Section 6.5 of SLAS942 and 3.3.3 of SLAU550, the MSP430FR2633 does not automatically invoke the BSL when the reset vector is empty. Therefore the TEST/RST pins must perform the hardware BSL invocation on a blank device.

Regards,
Ryan

0 Kaka over 8 years ago in reply to Ryan Brown1

Guru 24520 points

Hi Ryan,

Thank you for your explanation. I got it!!

Best regards.
Kaka

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2633: Confirm the "BSL18" on Errata