• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 754 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430FG4618: CCS/MSP430FG4618:Programming using MSP-EXP430 G2 launchpad

Hardik Pareek
Prodigy 10 points

Part Number: MSP430FG4618

Tool/software: Code Composer Studio

Dear Experts,

Is it possible to programme an MSP430-FG4618 micro-controller using MSP-EXP430 G2 launch pad via Jtag boot . if yes or no 

in both cases please give proper guidance to programme MSP430-FG4618 using jtag interface .

Thanks in Advance 

Regards

Hardik Pareek 

Eldaas technology pvt ltd.

**Attention** This is a public forum