Dear Champs,
As checking MSP Debuggers User's Guide (Rev. I), I found below information and it seems eZ430 on MSP-EX430G2 can program MSP430FRxx family.
But it can't work.
So that, we want to check eZ430 support MSP430FR2433 or not.
If you have any suggestion, please feel free to let me know.
Thanks a lot.
Dear Clemens & Ryan,
Thanks for your reply.
As you said, I also have checked these relative information on MSP Debuggers User's Guide (Rev. I).
On P45, it said "Flash and FRAM programming support" (see red block.). But it also remind "Limited device support". Hence, we checked Table 1. Debug Probes Features and Device Compatibility on P4.
But on Table 1. Debug Probes Features and Device Compatibility, we do not find eZ430 support any FRAM device.
So that, I hope to double check it with you below problems:
1. Does eZ430 on LaunchPad (MSP-EXP430G2) only support F2xxx and G2xxx?
2. Can eZ430 on LaunchPad (MSP-EXP430G2) not support any FRAM device?
3. If 2 is no, which FRAM device does eZ430 on LaunchPad (MSP-EXP430G2) support it?
If you have any suggestion, please feel free to let me know,
Thanks a lot.
**Attention** This is a public forum
