MSP430FR2632: MSP430FR2632 lack of room for code

Qianqian

Part Number: MSP430FR2632
Other Parts Discussed in Thread: MSP430FR2633

Hello,TI Experts,

Now I am using MSP430FR2632, "Touch" has been tested OK, but it has occupied 5.1Kbit，Their is only 2.9Kbit for RF code~and because of the lack of room,RF code compile failed ~

I want to know can the "touch code" be smaller? My "touch code"is generated CapTIvateDesignCenter?

over 7 years ago

0 Ryan Brown1 over 7 years ago

TI__Guru**** 216717 points

Hello Fawn,

Please Refer to the Software Library -> Benchmarks -> CODE (FRAM) and DATA (RAM) Requirements section of the CapTIvate Technology Guide: software-dl.ti.com/.../index.html

You touch code size looks well within expectations, you will need to reduce the RF code size or use the MSP430FR2633 device with 16 KB of FRAM.

Regards,
Ryan

0 Qianqian over 7 years ago in reply to Ryan Brown1

Genius 5010 points

Hi,Ryan
Thank you very much for your kindly help~

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2632: MSP430FR2632 lack of room for code