CCS/MSP430F5528: No USB FET found.

Hyusim Park

Prodigy 140 points

Part Number: MSP430F5528
Other Parts Discussed in Thread: MSP-FET

Tool/software: Code Composer Studio

Hello, could please anyone help me ;(

I bought msp-ts430RGC64USB.

I just connected usb port to computer...

my window is 7 x64

It is connected as HID

When I was trying to Project -> General connection Identify I saw this error message.

Error initializing emulator:
No USB FET was found

Please help me!!!!!!!

over 8 years ago

0 Lukas Badura over 8 years ago

TI__Expert 4695 points

Hi Park,

I assume you need also the programmer like this one
store.ti.com/msp-fet.aspx

best regards
Lukas

0 Hyusim Park over 8 years ago in reply to Lukas Badura

Prodigy 140 points

Even with the internal USB, do I still need msp-fet?
Is there any other way that I can try?

0 Lukas Badura over 8 years ago in reply to Hyusim Park

TI__Expert 4695 points

There is no debugger on board.
I suppose you are trying to download your code with CCS using the usb connector, right?
This will not work.
I'm not sure if this board supports downloading code with USB BSL.
Let me check.

0 Hyusim Park over 8 years ago in reply to Lukas Badura

Prodigy 140 points

Thank you!

For me, it's first time to use microcontroller.
I just thought that if I connect usb, it will work.

If i need some other things, what should i do with the usb port here????

0 Lukas Badura over 8 years ago in reply to Hyusim Park

TI__Expert 4695 points

What would you like to do with the micro?
What is the purpose for using the USB port in your application?

I would recommend to order the FET tool mentioned earlier for using CCS.

Best regards

0 Hyusim Park over 8 years ago in reply to Lukas Badura

Prodigy 140 points

I want to use the ADC in the MCU and send it to the bluetooth chipset.

So, I can not change the programm through USB, right?

0 Lukas Badura over 8 years ago in reply to Hyusim Park

TI__Expert 4695 points

You can change the program code, but only if you have the code ready.
You are not able to debug it.

See for reference this link.
e2e.ti.com/.../633166

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F5528: No USB FET found.