Msp430G2553 Proteus Simulation

mustafayilmaz

Prodigy 140 points

Other Parts Discussed in Thread: MSP430G2553

Hi TI forums,

I'm simulating msp430g2553 device on Proteus 8. There are some errors.

The maximum pin output current 50uA (not mA)

The pin output voltage 5V (When VCC = 3.3V)

How to fix error?

over 8 years ago

0 Ryan Meredith over 8 years ago

TI__Intellectual 1370 points

Hello,

Unfortunately TI does not support simulation models for MSP devices. You may want to try a different forum that is specific to Proteus or wait to see if a community member here answers your question.

Thanks for your understanding.

Best Regards,
Ryan

0 mustafayilmaz over 8 years ago in reply to Ryan Meredith

Prodigy 140 points

Thank you.

Regards,

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Msp430G2553 Proteus Simulation