CCS/MSP430FR5989: SX1276 LoRa integration with

Diptendu Pramakin

Part Number: MSP430FR5989
Other Parts Discussed in Thread: MSP430G2553

Tool/software: Code Composer Studio

Dear All,

I am new to MSP.

I am trying to integrate MSP430 LoRa Libray with SX1276 MCU used is MSP430FR5989. (made a PCB with this MCU plus SX1276 IC )

Link of the SX1276 Driver I am using https://github.com/Show-vars/msp430-radio

It has lots of compilation error

My Question is does anyone has tried this project with any MSP MCU ? I am using compiler Version: 7.3.0.00019

Does this driver supported in V7?

Regards,

Diptendu

over 8 years ago

0 Ryan Brown1 over 8 years ago

TI__Guru**** 219387 points

Diptendu,

This driver is intended to be used with the MSP430G2553 and raises several errors when built with the MSP430FR5989 primarily because of the different registers involved between these two devices. Please refer to the following migration guide: www.ti.com/.../slaa559e.pdf

Regards,
Ryan

0 Diptendu Pramakin over 8 years ago in reply to Ryan Brown1

Prodigy 20 points

Dear Ryan,

Thank you so much for your time to reply. Sure that will be great help. Once I go through the migration guide I will get in touch if there is still issues.

Regards,
Diptendu

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430FR5989: SX1276 LoRa integration with