• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 385 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/EZ430-RF2500-SEH: EZ430-RF2500 with accelerometer

Chee Tan
Prodigy 90 points

Part Number: EZ430-RF2500-SEH

Tool/software: Code Composer Studio

Hi, currently i am doing a project using MSP430 EZ430-RF2500. My objective is to feed the analog input of accelerometer into the end device and transmit the data from end device to Access point to be viewed and monitored using wireless data logger in my pc. I have zero programming knowledge and i am quite new to this field. If anyone has done something similar to this. Please share your code with me. Thank you very much.

  • 0
    TI__Guru 56685 points
    Hello,

    We ahve several examples of how to use the modules within the MSP430 associated with this evm. Most of these examples are located with TI Resource Explorer -> Software -> MSP430Ware. You can find TI Resource explorer within CCS or our cloud service (although the cloud service cannot program this particular EVM). You can see these in assembly or C. i recommend C code as assembly is not great to work with. Link to specific examples: dev.ti.com/.../

    There are also other EVMs and tools available that can complete your objective if you are not particularly tied to that hardware. Please check out our MSP430 Launchpads and associated boosterpacks for more information. You can also check out Energia as an alternate programming method for rapid prototyping.
    Energia (http://energia.nu )
    MSP430 Launchpads (www.ti.com/.../launchpads.html )

**Attention** This is a public forum