mspi4302041

shai eyni

Prodigy 90 points

Hello.

I have MSPI4302041 that the DCO was erase.

How can i restore it ?

I have tried the FLASH PRO but it was suddenly stopped.

Thanks.

over 7 years ago

0 Nathan Siegel over 7 years ago

TI__Genius 10980 points

Hi,

Could you please clarify what you erased and are trying to restore? The DCO is an oscillator, so it is not something with memory that can be erased.

Regards,
Nathan

0 shai eyni over 7 years ago in reply to Nathan Siegel

Prodigy 90 points

It was erase by mistake by one of my new software engineer assistant.
He (by mistake) set the pointer to this address .

0 Nathan Siegel over 7 years ago in reply to shai eyni

TI__Genius 10980 points

Hi,

Do you mean that the DCO code was erased? Could you please describe you you are trying to flash the device? Are you using CCS?

Regards,
Nathan

0 Dennis Lehman over 7 years ago in reply to Nathan Siegel

TI__Guru 71216 points

Hello Shai,

It's been sometime since we have heard back from so I will assume you have solved your issue and will close this thread. If this is not the case you can respond and re-open this thread.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

mspi4302041