hi

chetan sonwalkar

hi recently i started working on ez430rf2500 tool,i need to know how to transfer r exchange data between those two devices r how to connect those two devices,,,because m new to it so i don no...plz suggest me

over 14 years ago

0 William Goh over 14 years ago

TI__Genius 16205 points

Chetan,

The best place for you to start is to read this application note.

http://focus.ti.com/mcu/docs/litabsmultiplefilelist.tsp?sectionId=96&tabId=1502&literatureNumber=slaa378c&docCategoryId=1&familyId=342

Regards,

William

0 Joerg Quinten over 14 years ago in reply to William Goh

Guru 17650 points

Hi Chetan,

you can find some additional info here http://processors.wiki.ti.com/index.php/Category:MSP430_Getting_Started (in case of some 'getting started' info) and here http://processors.wiki.ti.com/index.php/EZ430-RF2500 for the eZ430-RF2500 in general.

Kind regards
aBUGSworstnightmare

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

hi