• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 439 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-GANG PROGRAMMER COMAND PROMT

Ernesto Zayas
Prodigy 10 points
Other Parts Discussed in Thread: MSP-GANG, MSP430G2433

Hi

I am using the software tooling MSP-GANG Programmer to program the microcontroler MSP430G2433, I would like to know if this software tool have command prompts, due to I want to use another sotware tooling to execute the programming. Someone knows if this tooling have commad promts?

Regards.

  • 0
    TI__Guru 56685 points

    Hello Ernesto,

    The MSP-GANG can be used in three ways:

    • Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
    • Program from Image – An image can be stored, which contains configuration options and code files. This allows users to program MSP devices standalone, without a PC
    • Programming from Script – Enables developers to automate more complicated programming procedures.

    From what you are describing, Script mode may be the closest thing you are looking for. Please see the MSP-GANG User Guide for more information on how to use the MSP-GANG in Scripting mode.

**Attention** This is a public forum