• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 422 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

RF1A library strobe() causing OPERR

CC430F5137: RF1A library strobe() causing OPERR

yilmazender
Prodigy 100 points

Part Number: CC430F5137

Hi,

I work with cc430f5137 for a wireless communication project. After I have used strobe function within SLAC525B/HAL/RF1A.c to send command, OPERR error flag occurs in RF1AIFERR register. I don't understand why it happen. Do you have any idea about this?

Regards,

Ender YILMAZ

R&D Enginner

**Attention** This is a public forum