RTOS/MSP432E401Y: Static IP address Initialisation

kalyan

Expert 1735 points

Part Number: MSP432E401Y

Tool/software: TI-RTOS

Hi,

Can anyone explain me how to initialize static ip address in the Tcpecho program for the msp432e401y launchpad.

Thank you

Regards

Kalyan.

over 7 years ago

0 Amit Ashara over 7 years ago

TI__Guru**** 244440 points

Hello Kalyan,

Please refer to the following post

e2e.ti.com/.../2540420

0 kalyan over 7 years ago in reply to Amit Ashara

Expert 1735 points

Hello sir,
Thank you for the reply.
I have added that code and built well with no errors. Howevre when i am use the wireshark, i haven't seen the ip address that i have initialised to the board.
it has to be identified, right?.

Thank you

Regards
Kalyan.

0 Amit Ashara over 7 years ago in reply to kalyan

TI__Guru**** 244440 points

Hello Kalyan,

When a static IP address is assigned to the board, it will not be assigned from the DHCP server. Instead if you ping to it you should be able to see response to the Ping working as expected.

0 kalyan over 7 years ago in reply to Amit Ashara

Expert 1735 points

Hi Amit,
Thank you

Regards
Kalyan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

RTOS/MSP432E401Y: Static IP address Initialisation