MSP-EXP430G2: msp430g2553 / 552

Revanth D

Prodigy 30 points

Part Number: MSP-EXP430G2
Other Parts Discussed in Thread: ENERGIA

can any help how to read a pwm signal using timers and interrupts in energia software .

over 8 years ago

0 Britta Ruelander over 8 years ago

TI__Genius 10860 points

Hi,

please confirm my following understanding regarding your request:

Your application has a PWM input signal and you want to use timers and interrupts to determine the duty cycle and frequency.

Currently there is no official "PWM capture" library available, but you still might want to check the Energia projects that are shared between users to see if anyone has shared his project on this topic. The Official 43oh Energia Forum could be a good starting point for you.

Best regards,

Britta

0 Revanth D over 8 years ago in reply to Britta Ruelander

Prodigy 30 points

Ok, thanks for your reply.

0 Britta Ruelander over 8 years ago in reply to Revanth D

TI__Genius 10860 points

Hi,

has your problem been solved? If so, please verify the given answer.
Otherwise please let me know how I can further help you.

Please note that I'll go ahead and close this thread in the next couple of days if I don't hear back from you. Replying to the thread will re-open it if necessary at some point.

Thanks and best regards,
Britta

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP-EXP430G2: msp430g2553 / 552