MSP432E401Y: MSP432E401Y EPI Register Setting

user4287930

Prodigy 80 points

Part Number: MSP432E401Y
Other Parts Discussed in Thread: TMS320F2812, MSP432E411Y

Hi,

I'm trying to use the EPI of MSP432E401Y by Ti-RTOS.

The EPI is used by a HOST-Bus 16bits mode.

If there is a helpful sample register set value, please tell me.

Thank you.

over 8 years ago

0 Chris Sterzik over 8 years ago

TI__Guru 74811 points

I will need to look into this further. What are you connecting to with the EPI?

Regards,
Chris

0 user4287930 over 8 years ago in reply to Chris Sterzik

Prodigy 80 points

Hello, Chris-san.

TMS320F2812 is used by the present system.

I'm considering to replace this to MSP432E401Y.

The FPGA is connected to TMS320F2812, and I'm accessing by XINTF.

Thank you.

0 Chris Sterzik over 8 years ago in reply to user4287930

TI__Guru 74811 points

I believe the only example is the demo for the new MSP432E411Y BGA EVM, www.ti.com/.../msp432e411y-bgaevm .

Here is the example:
dev.ti.com/.../

I am not sure if this is the interface you are looking for as the TMS part has dedicated address and data lines. See page 1103 of the TRM.
www.ti.com/.../slau723.pdf

Regards,
Chris

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432E401Y: MSP432E401Y EPI Register Setting