Hi,
I am designing a PCB with a MSP430FR2532 and multiple other sensors on the board. The goal is to make the board functioning wireless with a battery on the board to provide the power.
My question is that how should I connect TEST_SBWTCK and RST_NMI_SBWTDIO pins. I found that in the datasheet, the TEST_SBWTCK pin should be connected to the DVCC pin with a 47 Kohm Resistor between the pins. What about the RST_NMI_SBWTDIO? should it be connected to VCC through a pull up resistor?
Thanks
Aref
