• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 561 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430F135: 4 wire debugging using MSP - FET430UIF

abhijeet sonawale
Prodigy 40 points
Part Number: MSP430F135

Tool/software: Code Composer Studio

hi sir i m trying to debug my msp430f135 microcontroller using MSP-FET430UIF USB debugger  but  did the connection RST, TCK, TDI, TDO, VCC, GND but TEST pin i dont have in msp430F135.

pls tell me how to connect MSP430f135 with MSP FET430UIF.

http://www.ti.com/lit/ug/slau278ad/slau278ad.pdf 

  • 0
    TI__Guru 56685 points
    Hello Abhijeet,

    As noted in note C in Figure 2-1, the TEST pin is only available on devices with shared JTAG pins. This means this connection is not needed on devices with dedicated JTAG pins, so the connections are the same as outline din Figure 2-1 just without the TEST pin connection.

**Attention** This is a public forum