MSP430G2553: I2C interface with BME680/BME280 Bosch sensor

Sujatha P.M

Prodigy 200 points

Part Number: MSP430G2553

guys can anyone provide the code for msp430g2553 for interfacing an i2c device(BME680/BME280) any one of them

over 6 years ago

0 Tomasz Kocon over 6 years ago

Guru 26200 points

Why do not you try to port this code from other MSP430s?

0 Britta Ruelander over 6 years ago

TI__Genius 10860 points

Hi,

did you have a look at the code examples?

Please check the TI Resource Explorer for the MSP430G2553 and the I2C examples.

Let me know if you need anything else.

Best regards,

Britta

0 Britta Ruelander over 6 years ago in reply to Britta Ruelander

TI__Genius 10860 points

Hi,

I suppose that you were able to move on with your application as I didn't hear back from you anymore.
Please note that I am going to close this thread. In case you need further assistance on this topic you can reply back to this thread which will re-open it. In case you have other questions you can use the "Ask a related question" or "Ask a new question" button on the top right of this page.

Best regards,
Britta

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430G2553: I2C interface with BME680/BME280 Bosch sensor