RTOS / MSP430F5519:Use of NVS library

JLeon VP

Prodigy 155 points

Other Parts Discussed in Thread: MSP430F5529, MSP430F5242

Número de pieza: MSP430F5529

Herramienta / software: TI-RTOS

Hola,

¿Podría decirme si MSP430F524x admite el uso de la biblioteca NVS para flash de escritura / lectura?

Si puedes dejar enlaces a proyectos o códigos de ejemplo te lo agradeceré.

Ahora mismo estoy trabajando con el launchpad MSP-EXP430F5529 para problemas de prueba con TI-RTOS y luego moveré mi proyecto a la MSP430F5242

Gracias.

over 7 years ago

0 ToddMullanix over 7 years ago

TI__Guru* 96960 points

Hi,

We do not have the NVS (Non-Volatile Storage) module for the MSP430. We did not see a big enough demand to warrant the resources to implement/test/document/etc. it. You can use the MSP432 NVS driver as a example and create your own.

Todd

0 JLeon VP over 7 years ago in reply to ToddMullanix

Prodigy 155 points

Thank you very much for answering my question.
Would you know how I can read / write the flash at run time?

My project runs on TI-RTOS and I need to add this.

Thank you.

0 ToddMullanix over 7 years ago in reply to JLeon VP

TI__Guru* 96960 points

There are some flash APIs in the MSP430 driverlib (e.g. tirtos_msp43x_2_20_00_06\products\msp430_driverlib_2_70_01_01a\driverlib). I expect you could look at the MSPWare software package and they would have examples of it (albeit non-RTOS examples...but the RTOS is not really relevant for the flash APIs).

Todd

0 JLeon VP over 7 years ago in reply to ToddMullanix

Prodigy 155 points

Hi Todd

Sorry to take advantage of this thread, I saw in another question from a few years ago about ADC for RTOS that you had mentioned about a guide "How to move bare-metal code to TI-RTOS".
Could you give me the link to that file?
It's still for my project with MSP430.

Thanks

0 ToddMullanix over 7 years ago in reply to JLeon VP

TI__Guru* 96960 points

Hi,

I'm assuming you are talking about this thread: e2e.ti.com/.../479569

Unfortunately, we never completed the write-up. Please refer to the points in the noted thread.

Todd

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

RTOS / MSP430F5519:Use of NVS library