CCS/MSP430FR2000: Can not debug MSP430FR2000 with MSP-FET430UIF

LOC NGUYEN

Part Number: MSP430FR2000

Tool/software: Code Composer Studio

Hi,

I cannot debug MSP430FR2000 by MSP-FET430UIF. I used MSP Flasher to check connect, but it return error.

I connect MCU to Debug Tool like image below (i use VCC TOOL):

Can show my mistake?

0 LOC NGUYEN over 6 years ago

Error return from MSP Flasher:

0 Ling Zhu2 over 6 years ago in reply to LOC NGUYEN

Hi LOC,

Would you please try to use CCS or IAR download the code so that the firmware in your FET can be updated.

Regards,
Ling

0 LOC NGUYEN over 6 years ago in reply to Ling Zhu2

Hi Ling,

Can you show me how to update firmware FET430 by CCS or IAR? Do you have any document ?

Thanks,

0 LOC NGUYEN over 6 years ago in reply to LOC NGUYEN

Hi Ling,

I try to update new firmware for FET430UIF, but it report FET firmware is up to date (Firmware version: 3.11.00.001).

Thanks,
LOC

0 LOC NGUYEN over 6 years ago in reply to Ling Zhu2

Hi Ling,

My problem was resolved. Capacitance of capacitor in TCK pin is very high.

**Attention** This is a public forum

MSP low-power microcontroller forum