• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 79 subscribers
  • Views 548 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/EVM430-FR6047: EVM430-FR6047 Restarting

CCS/EVM430-FR6047: EVM430-FR6047 Multiple Meter Constants

fglaria
Intellectual 665 points

Part Number: EVM430-FR6047

Tool/software: Code Composer Studio

Hi,

I'm calibrating my Water Meter development, and found out some interesting approaches to calibrating for improving accuracy.

On this guide (FAQ, listed below), on point 1.2 11, It's adviced to have multiple meter constants over the entire flow rate range.

Is there a recommended way of implementing this?

Thanks.

**Attention** This is a public forum