CCS/MSP430F5529: Modbus slave in msp430 for communicating to HMI panel

ALEX JOSEPH

Part Number: MSP430F5529
Other Parts Discussed in Thread: MSP432E401Y

Tool/software: Code Composer Studio

Hi,

I'm new to the field of MSP.

I'm Trying to do a communication between msp430 microcontroller and HMI panel for sending and receiving data bits through registers in code composer studio.

please help me if any source code is available.

thanks,

alex

over 5 years ago

0 Wei.Jetim Zhao over 5 years ago

TI__Genius 13215 points

Hi Alex,

Thanks of using MSP device.

You could take the Peripheral Examples as reference code for starting.
dev.ti.com/.../

The items with spi, uart and i2c could be communication related.

0 ALEX JOSEPH over 5 years ago in reply to Wei.Jetim Zhao

Prodigy 40 points

Hi wei,

I have already gone through the resource explorer.
but Im having a weintek HMI device it supports Modbus communication.
So I'm trying to establish a Modbus_RTU communication between these two. making MSP as modbus slave.

alex

0 Wei.Jetim Zhao over 5 years ago in reply to ALEX JOSEPH

TI__Genius 13215 points

Hi Alex,

I'm afraid we don't have any example code based on MSP430 for Modbus communication.

0 ALEX JOSEPH over 5 years ago in reply to Wei.Jetim Zhao

Prodigy 40 points

Hi wei,

Im also having an MSP432E401y.
Is there any source codes available for the same.

alex,

0 Wei.Jetim Zhao over 5 years ago in reply to ALEX JOSEPH

TI__Genius 13215 points

Hi Alex,

I would suggest you create a new thread for MSP432E401 and our experts from MSP432 team with take your thread and reply you.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F5529: Modbus slave in msp430 for communicating to HMI panel