TIDU546A

ikon

Other Parts Discussed in Thread: MSP430FR2433, CC1312R, CC1101

Hi Support,

http://www.ti.com/lit/ug/tidu546a/tidu546a.pdf

If you notice in Fig.6 of Page 6 there are two lib files: Mesh Network G2533 - Master.lib and Mesh Network G2533 - Slave.lib.

Please advise how to get the lib files for the MSP430FR2433 or at least how to make and compile.

Thanks.

over 6 years ago

0 Dennis Lehman over 6 years ago

TI__Guru 71216 points

Hello ikon,

Unfortunately this reference design has been obsoleted.
Do you currently have the G2533 master and slave project files?
I might be able to help you port the code to the FR2433.

0 Dennis Lehman over 6 years ago in reply to Dennis Lehman

TI__Guru 71216 points

Hello ikon,

I'm being told that there is a possibility this reference design has not been obsoleted. Please allow some time and I will try to find it or replacement, if there is one.

0 Fredrik K over 6 years ago in reply to Dennis Lehman

TI__Guru** 106705 points

Hi Ikon,

I would recommend that you take a look at these two reference designs for CC1312R:
www.ti.com/.../TIDA-010032
www.ti.com/.../TIDA-010024

Regards,
Fredrik

0 ikon over 6 years ago in reply to Fredrik K

Genius 5355 points

Hi Fredrik,

Can we port the stack to the CC1101 using the MSP430FR32?

Thanks.

0 Fredrik K over 6 years ago in reply to ikon

TI__Guru** 106705 points

As stated above we do not support the reference design with MSP430 and CC1101 anymore.

Regards,
Fredrik

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

TIDU546A