CCS/MSP430G2553: How can view the graph of a PWM signal in ccs.

MOHAMMED YASEEN

Prodigy 110 points

Part Number: MSP430G2553

Tool/software: Code Composer Studio

I create a Four PWM signal using Timer A0 and it's register , So how can view the this PWM signal in graph.

over 6 years ago

0 Gary Gao over 6 years ago

TI__Mastermind 40040 points

Hi

We often use the oscilloscope or a logic analyzer to get the graph. I have not hear the CCS can get the PWM waves.

0 desouza over 6 years ago in reply to Gary Gao

TI__Guru**** 171309 points

Hi,

Due to the delays associated with the data transfer across the JTAG channel, the CCS Graph tool will have a very long blind time if attempted to be used as a real-time oscilloscope.

For additional details about graphs, check the section "Advanced Data Visualization" of our Debug User's Guide.
software-dl.ti.com/.../sdto_ccs_debug-handbook.html

Regards,
Rafael

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430G2553: How can view the graph of a PWM signal in ccs.