CCS/MSP430F1611: capture comapir

prabhu swami46

Prodigy 220 points

Part Number: MSP430F1611

Tool/software: Code Composer Studio

i want to capture module but it doesn't work

in compere i am getting interrupt but when i switch to capture mode it doesn't going in isr.

over 7 years ago

0 Wei.Jetim Zhao over 7 years ago

TI__Genius 13215 points

Hi Prabhu,

You didn't post enough information about your issue so that I can't give you any suggestion.

But you could go to the Peripherals Examples for Timer_A/B for reference to generate your code.
http://dev.ti.com/tirex/#/Device/MSP430F1611/?link=Software%2FMSP430Ware%2FDevices%2FMSP430F1611%2FPeripheral%20Examples%2FRegister%20Level

0 prabhu swami46 over 7 years ago in reply to Wei.Jetim Zhao

Prodigy 220 points

hi sir,

i tried to correct my code now i am getting capture events

and i am now able to measure frequency up to 5 khz correctly

but after 5khz the i am not getting correct result it is differs 100 to 120 hz

0 Wei.Jetim Zhao over 7 years ago in reply to prabhu swami46

TI__Genius 13215 points

Hi Prabhu,

Could you share more detailed information about your issue? How did you setup your testing? How did you do with the code? Any test results with issue to be shared?

0 Wei.Jetim Zhao over 7 years ago in reply to prabhu swami46

TI__Genius 13215 points

Hi prabhu,

I haven’t heard from you for about one week, so I’m assuming you were able to resolve your issue. If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information. If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F1611: capture comapir