• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 3 answers
  • Subscribers 80 subscribers
  • Views 617 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/MSP430FR5994: Warning: Unable to identify and include MCU header

Cheng Kai Lu
Prodigy 40 points
Part Number: MSP430FR5994


Tool/software: Linux

Hi everyone,

I am trying the basic LED blinking code on Linux OS, but when I want to compile it, this error comes out. Please help.

Thanks and regards,

Liew

  • 0
    TI__Genius 13215 points
    Hi Cheng,

    I'm not familiar with the Linux tool chain.

    But it seems the compiler can't find the msp430 include file which declares the register name such as WDTPW, WDTHOLD, and so on. You may need to check your including address or the configuration of you gcc tool chain.
  • 0
    Guru 317480 points
    gcc 4.6.3 was released in March 2012. The FR5994 header files were added in March 2016.

    Update your software.
  • 0
    TI__Genius 13215 points
    Hi Cheng,

    I haven’t heard from you for about one week, so I’m assuming you were able to resolve your issue. If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information. If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum