MSP430FR6043: gas flow measurements

user5137323

Part Number: MSP430FR6043

GAS flow measurements are performed on a pipe with 200-kHz, 400-kHz, and 500-kHz transducers available from Jiakang, Hurricane, CeramTec, and Audiowell.

How do different frequencies affect measurements?Which frequency has the best accuracy theoretically?

And where to download the 3D printable pipe design?

over 5 years ago

0 JD Crutchfield over 5 years ago

TI__Mastermind 28735 points

Hello,

Typically, the lower frequencies such as 200 kHz give better Zero Flow Drift while the 400 & 500kHz ones offer lower standard deviations. I'm not sure if any is theoretically the best, but I think 400kHz is the most common.

Unfortunately, I do not know of any 3D printable pipe designs available online. More information on the MSP430 Ultrasonic resources can be found on TI.com here: www.ti.com/.../overview.html

Thanks,
JD

0 Cash Hao11 over 5 years ago

TI__Mastermind 35605 points

Hi,
Which pipe size you require based on your application. G1.6, G2.5 or G4? And what accuracy level you need? We have tested some 3D print pipe in our lab, if you can provide us your requirements, I can check if we have the exact pipe design for you.

Best regards,
Cash Hao