Can anyone please guide me on how to connect my NEO-6M gps module with MSP430F5529LP? I tried using software serial but it just won't budge.I read some of the threads even remotely related to the issue, but I couldn't figure out how to go about solving my issue. I would be highly grateful if someone could at least lead me down the correct path ? Just the basic steps will also do.
Thanks in advance
Hi,
Firstly, you need connect NEO-6M GPS module with MSP430F5529, corresponding description in the following file, NEO-6M can use IIC, SPI, UART interface, and then you can refer to code example.
reference file: http://www.ti.com/lit/ds/symlink/msp430f5529.pdf
http://www.ti.com/lit/ug/slau208q/slau208q.pdf
code example:http://dev.ti.com/tirex/explore/node?node=ACt.3NsUP.t3V3gtuC8DhQ__IOGqZri__LATEST
Best Regards
Johnson
**Attention** This is a public forum
