• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 1093 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430G2553: layout define for dip 20 pin

Bonnie Chen
Intellectual 1160 points
Part Number: MSP430G2553


HI team,

do we have 20pin page as below?

  • 0
    TI__Intellectual 2115 points

    Hi Bonnie,

    All package related information can be found at https://www.ti.com/packaging

    I checked in that page and found that for the 20pin DIP package "N", it's drawing is actually the 16pin one (the one you post here). As all package information in datasheet are linked to that "packaging" page, we currently don't have a drawing for this 20pin DIP type "N". Sorry for that.

    I'll feedback this internally and could you please make a calculation according to the 16pin drawing?

    Apologize again for this inconvEnient.

    Regards,

    Harry

**Attention** This is a public forum