• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 80 subscribers
  • Views 1153 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2633: MSP430FR2633: RST pin and SBWTDIO pin

Himani Bhatt
Intellectual 390 points
Part Number: MSP430FR2633


Hello,

Am using MSP430FR2633 controller and for communication am using Spy-Bi-Wire interface.

But the pins RST and SBWTDIO are multiplexed, so how to configure both pins if I want to use RST and SBWTDIO?

  • 0
    Guru 34483 points

    RST / SBWTDIO is function is selected by SBW entry sequence (special pattern on TEST / RST) from SBW master (FET). This can not be changed by device itself. After power-up / reset RST is default pin function.

  • 0 in reply to zrno soli
    TI__Guru 71216 points

    Hello Himani,

    I haven’t heard from you for a couple of days now, so I’m assuming you were able to resolve your issue.
    If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum