MSP-FET: MSP-FET Flash Emulation Tool problem

Hi,

I'm getting issue trying to upgrade the MSP-FET Flash emulation tool based on the MSP Debuggers User's Guide on CCS9.0.1. I had measured the pin 2 (Vcc-tools) with respect to GND and verify that pin 2 is reading 3.3V however program continue failing after several attemp.

Error message seen includes :

• error connecting to the target-Unknown Device unknown device 

  Attached is more error message and details of the failure I encountered. May I know what may went wrong in theMSP-FET Flash Emulation Tool problem.docx upgrade?

  Thanks,

  Christina